Suspended Ceiling Access Ladders, Suspended Ceiling Access Ladder Installation, Suspended Ceiling Instructions, Access Ladders Melbourne

Company
 

11-13 Maida Avenue,
North Sunshine VIC 3020 AUSTRALIA

Mon-Fri 8:00AM-5:00PM

Tel: (03) 9310 8788


 

 

 

 


 

INSTALLATION GUIDE FOR SUSPENDED CEILINGS

AM-BOSS Access ladders comply to the Building Code of Australia


GUIDE TO INSTALLATION

Once a support frame has been made and fixed from a solid structure above the suspended ceiling, installation of the Am-boss pull-down access ladder can proceed.

Prior to installation, fit eyebolt to panel.  Push the fully assembled unit into the opening of the support frame, and fix to support frame to make unit secure.  We recommend fixing the unit to the support frame using the four (4) pre-drilled holes on either side of the long length of the unit.  Do not walk on the ladder at this time.

Now all you have to do, adjust the ladder, (two screws with lock nuts), finished.

Ceiling cut out sizes:

Access-Boss’ Commercial Series up to 3000mm: 1220mm x 570mm
Access-Boss’ Commercial Series 3000mm to 3800mm: 1520mm x 570mm
Ceiling Heights above 3800mm – Cutout to be advised.
Big-Boss’ Commercial Series up to 3000mm: 1220mm x 770mm
Big-Boss’ Commercial Series 3000mm to 3800mm: 1520mm x 770mm
Ceiling Heights above 3800mm – Cutout to be advised.

'Inferno-Boss' Commercial Series up to 3000mm: Ceiling Cutout 1290mm x 645mm - Note: Clear inside dimensions 1165mm x 455mm

 


Download PDF: Suspended Ceilings Installation Guide

 

>>Contact us now to find out what we can do for you, request a quote here...

 

 

 

 
Fire Rated LaddersPricesHome Domestic Attic Ladders Cmmercial Roof Access Ladders Prices Distributors Australia Wide Company Home Contact Amboss Access Ladders